CPM Photo Gallery : Latest Photos for Machines and Equipment

ARP Rod bolt stretch gauge

Peter Graves — Sun, 06 Sep 2009 15:55:34 GMT

All rod bolt free and stretched lengths are recorded at CPMotoworks and kept on file. Rod bolt stretch is the only way to ensure proper clamp load is applied to the fastener.

Better Engineering Jet Wash

Peter Graves — Mon, 20 Oct 2008 01:05:29 GMT

ZX200 Jet Wash Tank. Cleans and degreases with solvent free solution heated to 195 degrees and applied at 50psi while parts rotate.

Tags: CK10 CV616 Honing Plateau finish hone steel 4 bolt splayed caps conversion line

Bridgeport 2J w/DRO

Peter Graves — Sun, 19 Oct 2008 18:08:46 GMT

with Variable speed spindle and digital readout.

Buxton Bench Pro

Peter Graves — Sun, 19 Oct 2008 19:01:42 GMT

Buxton Engineering Bench Pro 1000 lb. capacity valve spring tester.

Crankshaft Stroke Checker

Peter Graves — Mon, 24 Aug 2009 23:23:14 GMT

This is how we verify the actual stroke of each crankshaft. We do this to new and used cranks to verify proper machining. It is not uncommon to find reground cranks upto .015" off in stroke. We can correct for this in our Storm Vulcan crankshaft grinder and add the proper fillets radius at the same time, eliminating weak points in the crank.

Magnaflux Y-7

Peter Graves — Sun, 19 Oct 2008 19:05:15 GMT

Dry powder crack detection. Used to check for flaws in block and head castings. Can be used to check frames and other metal parts for problems.

Tags: crack detection

Measuring Equipment

Peter Graves — Thu, 05 Jun 2008 15:44:29 GMT

All tolerance's are measured with extremely accurate tools and recorded.

Measuring Equipment 2

Peter Graves — Thu, 05 Jun 2008 15:45:24 GMT

ID's are checked to .0001"

Miller DVI2 MIG Welder

Peter Graves — Thu, 05 Jun 2008 15:43:00 GMT

Dual Volteage wire feed welder.

Mitutoyo SJ-201 Profilemeter

Peter Graves — Thu, 05 Jun 2008 15:46:17 GMT

Required equipment to verify surface finishes. Measures the Ra.

Neway Mfg. VFR-1000

Peter Graves — Thu, 05 Jun 2008 15:40:00 GMT

Valve refacing lathe. Stainless Steel, Titanium Valves are cut easily and accurately.

Peterson Powerstroker HC1DP Hone

Peter Graves — Thu, 05 Jun 2008 14:27:31 GMT

We use Sunnen honing stones and oil to achieve the straightest and roundest cylinders for perfect ring seal.

Tags: CK10 CV616 Honing Plateau finish

Piston Depth Gauge

Peter Graves — Sun, 06 Sep 2009 16:00:11 GMT

Custom built gauge to check piston depths on all pistons relative to the block deck.

Scotchman CPO275 cold saw

Peter Graves — Thu, 05 Jun 2008 15:38:58 GMT

Used to cleanly and precisely cut material for custom projects.

Skat Blast 850

Peter Graves — Sun, 17 May 2009 14:08:44 GMT

Storm Vulcan 15

Peter Graves — Thu, 05 Jun 2008 14:29:04 GMT

Storm Vulcan Crankshaft Grinder No. 15. Able to grind crankshafts up to 48" long and 6" stroke.

Tags: crankshaft grinding janesville wi

Storm Vulcan RT17y

Peter Graves — Thu, 05 Jun 2008 14:26:09 GMT

Equiped with a CBN cutter, this is used in conjunction with True Deck fixture to precisely and accurately surface blocks and to surface cylinder heads to the specific surface finish needed.

TMB-4000 Parts Washer

Peter Graves — Thu, 05 Jun 2008 14:30:32 GMT

Renegade Part Washer Solvent-Free Solutions are completely environmentally friendly.

WF Wells A-7 Band Saw

Peter Graves — Sun, 17 May 2009 14:07:10 GMT